Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lompoc, CA
Gate Installation in Lompoc is where most of our work here starts, and the conditions shape every project. This is a fog-belt town, so gates corrode and warp from near-daily marine moisture and salt-carrying onshore wind rather than from heat or heavy rain. The older 1940s to 1960s tract and Vandenberg-era housing around town means we spend as much time restoring old wrought-iron and wood farm-style gates as we do hanging new ones. We’re gate specialists only: repair, electric gate repair, and full installation, and nothing else on the schedule. Call (844) 834-0978. We answer 24/7.
Why Lompoc Homes Are Different
Lompoc sits in a coastal valley where the marine fog layer keeps the air damp and mildly cool year-round. That changes gate work in ways inland contractors don’t anticipate. Bare and poorly primed steel rusts fast here, and wood gates swell inside their frames, jamming hinges and latches until the gate won’t close squarely. The salt air speeds up corrosion on hardware even a few miles from the water.
The afternoon onshore wind off the fog belt is the other local factor. Hinges and latches on the windward side of a property loosen far faster than they would in an inland valley, so a technician called to a sagging gate often finds it needs re-hanging, not just adjusting.
The housing stock adds to it. Much of Lompoc is mid-century single-family tract housing from the 1950s through the 1970s, plus a large cluster of Vandenberg-era homes around Vandenberg Village. Detached garages, side-yard access gates, and older wood-and-wire farm fencing on the valley edges mean lots of original wood pickets and light-gauge metal frames. Those are usually worth re-hinging and re-posting rather than replacing, if the frame is still sound.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Lompoc Services
These are the two jobs Lompoc homeowners call about most, and each has its own detailed page.
Gate Repair in Lompoc
Most repair calls in Lompoc start with a gate that sags or drags, and the marine air is usually the culprit. We look at the hinges, latch alignment, posts, and frame condition first, because on a 1950s or 60s iron or wood gate the hardware often needs re-hanging rather than a simple adjustment. Swollen wood pickets and rusted pivot points get corrected together so the gate swings true instead of working loose again. We diagnose the actual cause rather than guessing at the symptom. You can read the full breakdown on Gate Repair in Lompoc.

Electric Gate Repair in Lompoc
A gate that opens partway and stops, reverses at random, or won’t respond at all usually points to the operator rather than the panels. We work on the electric side specifically: control boards, motor replacement, safety loops, and intercom or access wiring. Lompoc’s damp air finds its way into outdoor control enclosures and corrodes connections over time, so we check those first on coastal-valley properties. Because we service nine operator brands, we go to the specific known failure for your unit instead of trying generic fixes. Full details are on Electric Gate Repair in Lompoc.

Gate Installation in Lompoc
New Gate Installation in Lompoc has to be planned for the coast, not for a dry inland climate. Most properties here are mid-century tract homes or Vandenberg-era houses with detached garages and side-yard access points, and the fog belt plus salt-laden onshore wind corrodes hardware and swells wood faster than anywhere inland. So on a new install we choose materials and finishes that survive damp air, set posts to proper footing depth, and hang gates that can be adjusted as the wood settles rather than fighting the frame from day one. Our technicians have up to 9 years of experience, and we handle the whole scope, from a single driveway gate to a full electric system.
Automatic Gate Installation
Automation turns a manual gate into one that opens on a remote, keypad, or intercom. In Lompoc the operator has to be rated for damp coastal air, and the wiring has to be sealed against moisture. We measure the gate, confirm swing or slide, and schedule the install once the operator is ordered.
Signs you need it
You’re tired of getting out to open a heavy gate, or the gate is too wide or too far from the house to reach comfortably.
What it costs in Lompoc
Automatic gate installation usually runs $2,500 to $6,500 here, depending on the operator and whether a power run is needed; the written estimate sets the final price.
How we do it
We measure the gate and the run, mount and align the operator, wire the controls and safety edges, then test the full open-and-close cycle before we hand it over.
Driveway Gate Installation
A driveway gate is the main entrance to a property, so size, weight, and footing matter. Older Lompoc lots often have an existing fence line or farm-fence edge to work from, and we set posts to proper footing depth so the gate stays true through the damp season.
Signs you need it
Your driveway has no gate, the old one is beyond repair, or you want a wider opening for larger vehicles.
What it costs in Lompoc
Driveway gate installation typically ranges from $1,800 to $5,500, depending on width, material, and whether an operator is added; the written estimate sets the final price.
How we do it
We confirm the opening, set the posts to proper footing depth, hang and level the gate, then check the latch and swing before finishing.
What Gate Installation Costs in Lompoc
| Item | Typical range in Lompoc |
|---|---|
| Automatic gate installation | $2,500-$6,500 |
| Driveway gate installation | $1,800-$5,500 |
| Electric gate installation | $2,800-$7,000 |
Do you handle the power run and the safety edges on a new gate?
Yes. We handle the power run and the safety edges as part of the install, so the gate stops and reverses safely. Operators and wiring are measured and scheduled ahead of time.
How long does a new gate installation take in Lompoc?
Most residential installs take a scheduled visit or two, since the gate and operator are measured and ordered first. We give you the written estimate and timing before any work starts.
Brands We Service in Lompoc
We work on your brand. That means LiftMaster, FAAC, BFT, and Mighty Mule among the nine operator brands we service, from entry-level residential units to commercial-grade systems. We don’t claim stocked parts, but our specialist focus means faster turnaround on the brands we know. See the full list on our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lompoc, CA
| Service | Typical range in Lompoc |
|---|---|
| Automatic gate installation | $2,500-$6,500 |
| Driveway gate installation | $1,800-$5,500 |
| Electric gate installation | $2,800-$7,000 |
In Lompoc, price climbs with gate width and weight, the material you choose, and whether a power run or a new operator is part of the job; the damp coastal air also pushes some owners toward finishes and hardware that hold up better, which is worth it here. Every price is quoted and agreed before any work starts, and the written estimate sets the final cost.
Neighborhoods We Serve in Lompoc
We cover Lompoc and the surrounding valley, including the older core and the Vandenberg-era homes. Our technicians reach most of the area on the same visit once a job is scheduled. Call (844) 834-0978 for a free estimate.
- Vandenberg Village
- The older core near downtown Lompoc
- Valley-edge properties with farm-style fencing
- Side-yard and detached-garage access points
Service Area – Cities Near Lompoc
Lompoc sits in the middle of a stretch of Central Coast communities we serve. Neighbors just to the south include Vandenberg Village, CA and Vandenberg AFB, CA, both close enough for the same coastal-valley conditions to apply. To the north we cover Orcutt, CA, and our main service area is Santa Maria, CA. If you’re just outside these lines, call and we’ll confirm coverage for your address.
Serving Lompoc, CA – Our Local Coverage Area
We serve Lompoc and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lompoc
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. Most Lompoc calls get a same-day visit when you reach us during dispatch hours. A call outside dispatch hours is booked into the next opening.
Many gate projects need a permit, so check with the city’s building department before work starts, and confirm any HOA rules for height, style, or setback. We work to whatever the property allows.
Yes. We serve Lompoc and the surrounding valley, including Vandenberg Village, and we extend to nearby communities like Orcutt and Santa Maria. Call (844) 834-0978 to confirm your address.
Whether your gate needs a repair, an operator upgrade, or a full new install, we’re the gate specialists for Lompoc. Call (844) 834-0978 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Lompoc Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Kristen Hoffman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Nicole Kowalski"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Yolanda Morales